A.7 Physical controls

A.7.12 Cabling security

Not mandatory by default – decided in your SoA

What it means in plain language

Protect power and data cables from interception, interference or damage.

Is it mandatory? Not automatically. You must consider this control in your Statement of Applicability (6.1.3 d). Include it if your risk assessment, laws, contracts or business needs require it; if you exclude it, write down a justification an auditor will accept.

Why this control matters

Cabling problems often start as ordinary facilities changes: a moved rack, an untidy patch lead, or shared trays that let someone tap, cut, or crush critical lines. The Cabling Security Procedure should translate the control into everyday practice through route approvals, segregation, and traceable inspections owned by facilities and IT. It should also link cable work to access, maintenance, and change records so issues are visible before service interruption or exposure.

Common auditor findings to check for

Potential gaps to test in your own environment, not a claim about observed audit frequency.

  • Cable routes cross public walkways without conduit or cover, creating trip, damage, and unauthorized access risks that were never formally assessed.
  • Patch panels, risers, or floor boxes lack labels and route maps, so maintenance staff cannot verify segregation between power and data paths.
  • Temporary cabling installed during moves remains in place with no inspection log, as roles for review, approval, and removal were not assigned.

How you can implement it

Tools and review intervals are examples; choose them according to risk, obligations and your operating environment.

  • Assign facilities for physical route integrity and IT for data-path sensitivity. Require a pre-work check for new installs or changes, including route drawing updates, segregation from electrical lines, and approval where cables pass shared areas, ceilings, risers, or external enclosures.
  • Use practical tools such as cable maps, numbered tags, and inspection checklists to confirm routing, shielding, and enclosure status. Record where conduits, trunking, or raised-floor routes are used, plus any exceptions approved with compensating measures such as restricted access or additional monitoring.
  • Schedule risk-based walkthroughs after moves, adds, or building works, and periodically in high-traffic or high-humidity areas. Evidence should show who inspected, what was checked, what defects were found, and which corrective actions were raised, owned, and closed.
  • Treat failures as operational issues, not paperwork gaps: crushed cables, shared trays, or unsealed penetrations can enable interception or outage. Escalate repeated defects through corrective action, and update the asset or facility register when routes, racks, or cabinet locations change.

What an auditor will ask to see

  • Cable route diagram showing power/data segregation, cabinet to socket paths, and controlled penetration points.
  • Completed cabling inspection checklist with defect notes, photo references, owner, target date, and closure record.
  • Work order or change ticket for a move or re-route, including approval, install date, and post-install verification.
  • Maintenance or facilities log showing tagged cables, conduit use, and any exception rationale for exposed sections.

Baseline documents in the kit

These free kit documents help you document or evidence A.7.12. Each one is tailored to your organization when you build your kit.

Connect this work to your ISMS

Review the dependencies with A.7.8 — Equipment siting and protection and A.7.4 — Physical security monitoring. Keep the ownership and evidence consistent across these activities.

Required information and the kit’s 19-document core for the wider implementation context.

Use the SIG and CAIQ questionnaire accelerator to find supporting documents. A mapping is a starting point: verify your actual operating evidence before answering a buyer.

For help adapting this to your environment, explore ISO/IEC 27001 consulting, starting with a free one-hour consultation.

Get these documents tailored to your organization

109 ready-to-edit documents, including all 19 mandatory ones, tailored from a short scoping questionnaire and linked to your risk register and SoA.

Start free

Plain-language interpretation by an ISO/IEC 27001 lead implementer, not the official text of ISO/IEC 27001:2022.