A.7 Physical controls

A.7.8 Equipment siting and protection

Not mandatory by default – decided in your SoA

What it means in plain language

Place and protect equipment so it is safe from physical and environmental threats and unauthorised access.

Is it mandatory? Not automatically. You must consider this control in your Statement of Applicability (6.1.3 d). Include it if your risk assessment, laws, contracts or business needs require it; if you exclude it, write down a justification an auditor will accept.

Why this control matters

Equipment siting and protection fails when placement decisions are left to convenience, desk availability, or cabling ease. The operational priority is to assess the room, rack, or desk position before assets are installed, then document the environmental and physical safeguards chosen for that location. It is especially useful where equipment may be exposed to overheating, accidental damage, public visibility, or casual tampering.

Common auditor findings to check for

Potential gaps to test in your own environment, not a claim about observed audit frequency.

  • Servers were installed in a poorly ventilated cupboard, creating heat and airflow problems that had not been reviewed against the room’s physical conditions.
  • Monitors faced a public walkway, allowing passers-by to view sensitive information because desk orientation was not part of the layout review.
  • Critical equipment was placed beside drinks and cleaning supplies, showing no local protection rule or installation check for environmental and spill risk.

How you can implement it

Tools and review intervals are examples; choose them according to risk, obligations and your operating environment.

  • Require a siting check before installation or relocation. The check should consider heat, humidity, dust, liquids, power quality, vibration, sunlight, and whether the asset can be seen or reached by unauthorised people. The responsible owner, usually IT or facilities, should sign the check before equipment is powered on or moved into service.
  • Use fit-for-purpose protective measures: locked racks, raised floors or cable trays, screen filters or revised desk orientation, surge protection, and controlled access to the room or cabinet. If the environment is shared, separate critical equipment from public traffic and housekeeping routes so accidental contact is less likely. Note any residual risk and who accepted it.
  • Set practical inspection routines. Facilities can test cooling and power continuity, while IT can confirm that equipment is secure, labels are intact, and nothing has changed around the asset since installation. A simple monthly checklist should capture blocked vents, damaged locks, new glare, or temporary items such as cartons or drinks placed too close to devices.
  • Keep records that show the decision trail, not just the final placement. Retain the siting assessment, room diagram or rack plan, maintenance tickets, and photographs where allowed. When an asset is replaced or a room use changes, repeat the review rather than assuming the previous arrangement still fits the risk. Escalate any unresolved environmental issue through the change process.

What an auditor will ask to see

  • Completed equipment siting assessment signed by IT and facilities before installation.
  • Room or rack layout diagram showing asset position, access route, and environmental controls.
  • Inspection or maintenance record noting temperature, clearance, lock status, or relocation actions.

Baseline documents in the kit

These free kit documents help you document or evidence A.7.8. Each one is tailored to your organization when you build your kit.

Connect this work to your ISMS

Review the dependencies with A.7.5 — Protecting against physical and environmental threats and A.7.13 — Equipment maintenance. Keep the ownership and evidence consistent across these activities.

Required information and the kit’s 19-document core for the wider implementation context.

Use the SIG and CAIQ questionnaire accelerator to find supporting documents. A mapping is a starting point: verify your actual operating evidence before answering a buyer.

For help adapting this to your environment, explore ISO/IEC 27001 consulting, starting with a free one-hour consultation.

Get these documents tailored to your organization

109 ready-to-edit documents, including all 19 mandatory ones, tailored from a short scoping questionnaire and linked to your risk register and SoA.

Start free

Plain-language interpretation by an ISO/IEC 27001 lead implementer, not the official text of ISO/IEC 27001:2022.